Equivalent Grades & Cross-Reference
Cross-reference designations across UNS, EN/DIN, ISO, SAE, and JIS standards. Comparable does not mean directly interchangeable. Always verify composition tolerance limits and mechanical requirements.
International standard designations are established by distinct standards bodies with differing testing standards (e.g. ASTM E8 vs ISO 6892-1). Even when chemical compositions overlap, allowable trace impurities (such as phosphorus, sulfur, or iron), grain size requirements, temper nomenclature, and minimum elongation criteria can differ.
Never authorize a structural alloy substitution without verifying the governing procurement specification, temper, ruling section size, and environmental compatibility.
Relationship Classification Governance
Show All TypesIdentical chemical composition and mechanical requirements across different naming authorities.
Rule: Direct 1:1 dual specification permissible subject to certified mill test reports (MTR).Officially recognized counterpart in another national or international engineering standard (e.g. ASTM to EN).
Rule: Chemical limits or testing protocols may have subtle differences (e.g. tighter P/S ceilings or impact requirements). Engineering review required before substitution.Substantially identical chemistry and overlapping mechanical envelope, but slight variations in allowable trace elements or testing protocols exist across governing standards.
Rule: Direct commercial substitution is generally permissible subject to certified Mill Test Report (MTR) confirmation for critical applications.Similar base alloy chemistry and general functional properties, but noticeable divergence in allowable impurity ceilings, cold-work response, or minimum yield requirements.
Rule: Engineering substitution review required. Design calculations must verify temper, formability, and corrosion limits before specifying as a direct replacement.Similar base chemistry and functional performance envelope, but not officially harmonized by standards organizations.
Rule: Comparable does not mean equivalent. Heat treatment response and dimensional tolerances may diverge.Close metallurgical alternative when the primary grade is unavailable or obsolete.
Rule: Design parameters (weldability, hardenability, fatigue limit) must be re-evaluated for the specific application.Frequently evaluated side-by-side during trade-off studies or alloy selection.
Rule: Materials serve different design priorities (e.g. higher strength vs superior corrosion resistance or cost).Materials superficially mistaken for equivalents that exhibit critical metallurgical incompatibilities.
Rule: DO NOT SUBSTITUTE without full engineering re-qualification.| Source Alloy (UNS) | Relationship Type | Target Grade / Standard | Engineering Scope & Nuance | Actions |
|---|---|---|---|---|
| Natural Rubber (NR)General-Purpose Diene Rubbers | Commonly Compared | Styrene-Butadiene Rubber (SBR)Confidence: HIGH | NR provides higher tensile strength, tear resistance, and resilience due to strain crystallization; SBR offers lower cost and superior dry sliding abrasion resistance. | |
| Nitrile Butadiene Rubber (NBR)Oil & Fuel Resistant Elastomers | Commonly Compared | Ethylene Propylene Diene Rubber (EPDM)Confidence: HIGH | Classic polar vs non-polar trade-off: NBR resists petroleum oils and fuels but is degraded by polar solvents and ozone; EPDM resists ozone, hot water, and steam but is destroyed by petroleum hydrocarbons. | |
| Nitrile Butadiene Rubber (NBR)Oil & Fuel Resistant Elastomers | Commonly Compared | Fluoroelastomer (FKM)Confidence: HIGH | FKM provides higher continuous temperature resistance (+200°C) and aggressive synthetic fuel resistance at significantly higher material cost than NBR. | |
| Chloroprene Rubber (CR / Neoprene)Oil & Fuel Resistant Elastomers | Commonly Compared | Nitrile Butadiene Rubber (NBR)Confidence: HIGH | NBR offers superior petroleum oil and fuel resistance; CR provides superior ozone/weathering resistance and flame retardancy. | |
| Chloroprene Rubber (CR / Neoprene)Oil & Fuel Resistant Elastomers | Commonly Compared | Ethylene Propylene Diene Rubber (EPDM)Confidence: HIGH | EPDM provides superior weather/ozone endurance and higher steam resistance; CR provides moderate petroleum oil resistance and self-extinguishing flame properties where EPDM would dissolve or burn. | |
| Ethylene Propylene Diene Rubber (EPDM)Weathering & Chemical Resistant Elastomers | Commonly Compared | Nitrile Butadiene Rubber (NBR)Confidence: HIGH | Fundamental polarity contrast: EPDM resists environmental weathering, steam, and polar fluids but is destroyed by petroleum oils; NBR resists petroleum fuels and oils but is attacked by ozone and polar solvents. | |
| Ethylene Propylene Diene Rubber (EPDM)Weathering & Chemical Resistant Elastomers | Commonly Compared | Chloroprene Rubber (CR / Neoprene)Confidence: HIGH | EPDM provides superior outdoor weathering and higher continuous operating temperature; CR provides moderate petroleum oil resistance and flame retardancy. | |
| Butyl Rubber (IIR)Weathering & Chemical Resistant Elastomers | Commonly Compared | Natural Rubber (NR)Confidence: HIGH | IIR provides roughly 10x lower air and gas permeability and superior damping; NR provides far superior rebound resilience and dynamic fatigue life. | |
| Butyl Rubber (IIR)Weathering & Chemical Resistant Elastomers | Commonly Compared | Ethylene Propylene Diene Rubber (EPDM)Confidence: HIGH | Both polymers exhibit good ozone and weather resistance; IIR is chosen for gas and moisture impermeability, while EPDM is chosen for higher temperature continuous steam/hot water service. | |
| Silicone Rubber (VMQ)High-Temperature & Specialty Elastomers | Commonly Compared | Fluoroelastomer (FKM)Confidence: HIGH | VMQ offers unmatched low-temperature flexibility (-60°C) and lower material cost; FKM offers vastly superior fuel, chemical, and solvent resistance and higher tensile/tear strength. | |
| Silicone Rubber (VMQ)High-Temperature & Specialty Elastomers | Commonly Compared | Ethylene Propylene Diene Rubber (EPDM)Confidence: HIGH | Both resist ozone and weathering; VMQ extends continuous temperature range to +200°C (-60°C to +200°C), whereas EPDM provides higher mechanical tear strength and lower cost up to 125°C. | |
| Polyether Polyurethane (EU)Polyurethane Elastomers | Commonly Compared | Ethylene Propylene Diene Rubber (EPDM)Confidence: HIGH | Both materials resist water and weathering; EU delivers far higher tensile strength, cut resistance, and dynamic slurry wear endurance; EPDM operates at higher steam temperatures (+150°C vs +80°C). |