Verified Production Database
Materials Directory
Explore 173 verified stainless steel, steel, aluminum, copper, cast iron, silver, and rubber & elastomers alloys. Review condition-specific properties, composition limits, and authoritative standard references.
Filter Material Subfamily:
173 Material Records Qualified
Sort By:
Scroll horizontally for full specifications
| Designation • Canonical Grade | Subfamily | Standard Identifiers | Conductivity (% IACS) | Yield & Context | Density | Status | Actions |
|---|---|---|---|---|---|---|---|
| 1050 Aluminum1050A | Wrought Aluminum Alloys | AA: 1050UNS: A91050EN: EN AW-1050A | — | ≥ 20 MPaMINIMUM · O Temper · Sheet · 0.2mm to 6.0mm | 2.71 g/cm³TYPICAL | VERIFIED | |
| 1100 AluminumAA 1100 | Wrought Aluminum Alloys | AA: 1100UNS: A91100ISO: Al99.0Cu | 59 % IACSTYPICAL · O Temper | 34 MPaTYPICAL · O Temper · Drawn Tube | 2.71 g/cm³TYPICAL | VERIFIED | |
| 17-4 PH (630) Stainless Steel | Precipitation Hardening | COMMERCIAL: 17-4 PHTYPE: 630UNS: S17400 | — | 1275.5 MPaTYPICAL · H900 · Bar · LONGITUDINAL · Typical longitudinal bar properties; section dimensions and test temperature not stated in this table. Not minimum requirements. | 7.78 g/cm³TYPICAL · Condition A · Source temperature not specified. Metric density retained independently; rounded imperial equivalents are not used. | VERIFIED | |
| 201 Stainless Steel | Austenitic | TYPE: 201SPECIFICATION: 201 Stainless Steel Engineering Datasheet | — | ≥ 310 MPaMINIMUM · Annealed · Sheet and Strip | 7.81 g/cm³TYPICAL | VERIFIED | |
| 2011 AluminumAA 2011 | Wrought Aluminum Alloys | AA: 2011UNS: A92011ISO: AlCu6BiPb | 39 % IACSTYPICAL · T3 Temper | 296 MPaTYPICAL · T3 Temper · Cold Finished Rod & Bar | 2.82 g/cm³TYPICAL | VERIFIED | |
| 2014 AluminumAA 2014 | Wrought Aluminum Alloys | AA: 2014UNS: A92014ISO: AlCu4SiMg | 50 % IACSTYPICAL · O Temper | 97 MPaTYPICAL · O Temper · Cold Finished Rod & Bar | 2.8 g/cm³TYPICAL | VERIFIED | |
| 2017 AluminumAA 2017 | Wrought Aluminum Alloys | AA: 2017UNS: A92017ISO: AlCu4MgSi | 50 % IACSTYPICAL · O Temper | 70 MPaTYPICAL · O Temper · Cold Finished Rod & Bar | 2.79 g/cm³TYPICAL | VERIFIED | |
| 202 Stainless Steel | Austenitic | TYPE: 202SPECIFICATION: 202 Stainless Steel Engineering Datasheet | — | ≥ 310 MPaMINIMUM · Annealed · Sheet and Strip | 7.8 g/cm³TYPICAL | VERIFIED | |
| 2024 AluminumAA 2024 | Wrought Aluminum Alloys | AA: 2024UNS: A92024ISO: AlCu4Mg1 | 50 % IACSTYPICAL · O Temper | 76 MPaTYPICAL · O Temper · Cold Finished Rod & Bar | 2.77 g/cm³TYPICAL | VERIFIED | |
| 3003 AluminumAA 3003 | Wrought Aluminum Alloys | AA: 3003UNS: A93003ISO: AlMn1Cu | 50 % IACSTYPICAL · O Temper | 41 MPaTYPICAL · O Temper · Drawn Tube | 2.73 g/cm³TYPICAL | VERIFIED | |
| 301 Stainless Steel | Austenitic | TYPE: 301SPECIFICATION: 301 Stainless Steel Engineering Datasheet | — | ≥ 276 MPaMINIMUM · Annealed · Sheet and Strip | 7.88 g/cm³TYPICAL | VERIFIED | |
| 302 Stainless Steel | Austenitic | TYPE: 302SPECIFICATION: 302 Stainless Steel Engineering Datasheet | — | ≥ 205 MPaMINIMUM · Annealed · Sheet and Strip | 7.9 g/cm³TYPICAL | VERIFIED | |
| 303 Stainless Steel | Austenitic | TYPE: 303SPECIFICATION: 303 Stainless Steel Engineering Datasheet | — | ≥ 205 MPaMINIMUM · Cold Finished Annealed Bar · Bar | 7.9 g/cm³TYPICAL | VERIFIED | |
| 304 Stainless Steel | Austenitic | TYPE: 304UNS: S30400SPECIFICATION: 304 Stainless Steel Engineering Datasheet | — | ≥ 206.8 MPaMINIMUM · ASTM requirements (producer sheet) · Plate · Separate ASTM grade column in producer datasheet; heat treatment and thickness applicability not stated for these requirements. Typical 0.375-inch plate column is not reused as a guarantee. | 7.9 g/cm³TYPICAL · Published metric value; no test temperature stated. | VERIFIED | |
| 304L Stainless Steel | Austenitic | TYPE: 304LUNS: S30403SPECIFICATION: 304L Stainless Steel Engineering Datasheet | — | ≥ 172.4 MPaMINIMUM · ASTM requirements (producer sheet) · Plate · Separate ASTM grade column in producer datasheet; heat treatment and thickness applicability not stated for these requirements. Typical 0.375-inch plate column is not reused as a guarantee. | 7.9 g/cm³TYPICAL · Published metric value; no test temperature stated. | VERIFIED | |
| 305 Stainless Steel | Austenitic | TYPE: 305SPECIFICATION: 305 Stainless Steel Engineering Datasheet | — | ≥ 170 MPaMINIMUM · Annealed · Sheet and Strip | 7.9 g/cm³TYPICAL | VERIFIED | |
| 309 Stainless Steel | Austenitic | TYPE: 309SPECIFICATION: 309 Stainless Steel Engineering Datasheet | — | ≥ 205 MPaMINIMUM · Annealed · Plate, Sheet and Strip | 7.9 g/cm³TYPICAL | VERIFIED | |
| 310 Stainless Steel | Austenitic | TYPE: 310SPECIFICATION: 310 Stainless Steel Engineering Datasheet | — | ≥ 205 MPaMINIMUM · Annealed · Plate, Sheet and Strip | 7.9 g/cm³TYPICAL | VERIFIED | |
| 3103 AluminumEN AW-3103 | Wrought Aluminum Alloys | AA: 3103UNS: A93103EN: EN AW-3103 | — | ≥ 115 MPaMINIMUM · H14 Temper · Sheet · 0.2mm to 6.0mm | 2.73 g/cm³TYPICAL | VERIFIED | |
| 316 Stainless Steel | Austenitic | TYPE: 316UNS: S31600SPECIFICATION: 316 Stainless Steel Engineering Datasheet | — | ≥ 206.8 MPaMINIMUM · ASTM requirements at room temperature (producer sheet) · Plate · Separate ASTM grade column in producer datasheet; heat treatment and thickness applicability not stated for these requirements. Typical 0.375-inch plate column is not reused as a guarantee. Source specifies room temperature without a numeric temperature. | 7.9 g/cm³TYPICAL · Published metric value; no test temperature stated. | VERIFIED | |
| 316L Stainless Steel | Austenitic | TYPE: 316LUNS: S31603SPECIFICATION: 316L Stainless Steel Engineering Datasheet | — | ≥ 172.4 MPaMINIMUM · ASTM requirements at room temperature (producer sheet) · Plate · Separate ASTM grade column in producer datasheet; heat treatment and thickness applicability not stated for these requirements. Typical 0.375-inch plate column is not reused as a guarantee. Source specifies room temperature without a numeric temperature. | 7.9 g/cm³TYPICAL · Published metric value; no test temperature stated. | VERIFIED | |
| 321 Stainless Steel | Austenitic | TYPE: 321SPECIFICATION: 321 Stainless Steel Engineering Datasheet | — | ≥ 205 MPaMINIMUM · Annealed · Plate, Sheet and Strip | 7.9 g/cm³TYPICAL | VERIFIED | |
| 347 Stainless Steel | Austenitic | TYPE: 347SPECIFICATION: 347 Stainless Steel Engineering Datasheet | — | ≥ 205 MPaMINIMUM · Annealed · Plate, Sheet and Strip | 7.96 g/cm³TYPICAL | VERIFIED | |
| 409 Stainless Steel | Ferritic | TYPE: 409UNS: S40920SPECIFICATION: 409 Stainless Steel Engineering Datasheet | — | ≥ 170 MPaMINIMUM · Annealed · Sheet and Strip | 7.7 g/cm³TYPICAL | VERIFIED | |
| 410 Stainless Steel | Martensitic | TYPE: 410SPECIFICATION: 410 Stainless Steel Engineering Datasheet | — | ≥ 205 MPaMINIMUM · Annealed · Bar and Sheet | 7.75 g/cm³TYPICAL | VERIFIED | |
| 420 Stainless Steel | Martensitic | TYPE: 420SPECIFICATION: 420 Stainless Steel Engineering Datasheet | — | ≥ 345 MPaMINIMUM · Annealed · Bar and Strip | 7.75 g/cm³TYPICAL | VERIFIED | |
| 5005 AluminumEN AW-5005 | Wrought Aluminum Alloys | AA: 5005UNS: A95005EN: EN AW-5005 | — | ≥ 110 MPaMINIMUM · H34 Temper · Sheet · 0.2mm to 12.5mm | 2.7 g/cm³TYPICAL | VERIFIED | |
| 5052 AluminumAA 5052 | Wrought Aluminum Alloys | AA: 5052UNS: A95052ISO: AlMg2.5 | 35 % IACSTYPICAL | 90 MPaTYPICAL · O Temper · Drawn Tube | 2.68 g/cm³TYPICAL | VERIFIED | |
| 5083 AluminumEN AW-5083 | Wrought Aluminum Alloys | AA: 5083UNS: A95083EN: EN AW-5083 | — | ≥ 125 MPaMINIMUM · O / H111 Temper · Sheet · 0.2mm to 6.3mm | 2.65 g/cm³TYPICAL | VERIFIED | |
| 5251 AluminumEN AW-5251 | Wrought Aluminum Alloys | AA: 5251UNS: A95251EN: EN AW-5251 | — | ≥ 60 MPaMINIMUM · O Temper · Sheet & Plate · 0.2mm to 50.0mm | 2.69 g/cm³TYPICAL | VERIFIED | |
| 5454 AluminumEN AW-5454 | Wrought Aluminum Alloys | AA: 5454UNS: A95454EN: EN AW-5454 | — | ≥ 85 MPaMINIMUM · O / H111 Temper · Sheet · 0.2mm to 6.0mm | 2.68 g/cm³TYPICAL | VERIFIED | |
| 5754 AluminumEN AW-5754 | Wrought Aluminum Alloys | AA: 5754UNS: A95754EN: EN AW-5754 | — | ≥ 80 MPaMINIMUM · H111 Temper · Sheet · 0.2mm to 6.0mm | 2.66 g/cm³TYPICAL | VERIFIED | |
| 6005A AluminumEN AW-6005A | Wrought Aluminum Alloys | AA: 6005AUNS: A96005EN: EN AW-6005A | — | ≥ 225 MPaMINIMUM · T6 Temper · Extrusions · up to 5mm | 2.7 g/cm³TYPICAL | VERIFIED | |
| 6026 AluminumEN AW-6026 | Wrought Aluminum Alloys | AA: 6026UNS: A96026EN: EN AW-6026 | — | ≥ 360 MPaMINIMUM · T9 Temper · Extruded and Drawn Bar | 2.72 g/cm³TYPICAL | VERIFIED | |
| 6060 AluminumEN AW-6060 | Wrought Aluminum Alloys | AA: 6060UNS: A96060EN: EN AW-6060 | — | ≥ 120 MPaMINIMUM · T5 Temper · Extrusions · Up to 150mm Dia., 15mm WT tube, 5mm WT profiles | 2.7 g/cm³TYPICAL | VERIFIED | |
| 6061 AluminumAA 6061 | Wrought Aluminum Alloys | AA: 6061UNS: A96061ISO: AlMg1SiCu | 47 % IACSTYPICAL · O Temper | 55 MPaTYPICAL · O Temper · Cold Finished Rod & Bar | 2.7 g/cm³TYPICAL | VERIFIED | |
| 6063 AluminumAA 6063 | Wrought Aluminum Alloys | AA: 6063UNS: A96063ISO: AlMg0.7Si | 58 % IACSTYPICAL · O Temper | 48 MPaTYPICAL · O Temper · Drawn Tube | 2.69 g/cm³TYPICAL | VERIFIED | |
| 6082 AluminumEN AW-6082 | Wrought Aluminum Alloys | AA: 6082UNS: A96082EN: EN AW-6082 | — | ≤ 85 MPaMAXIMUM · O Temper · Sheet · 0.4mm to 6.0mm | 2.7 g/cm³TYPICAL | VERIFIED | |
| 6101 AluminumEN AW-6101 | Wrought Aluminum Alloys | AA: 6101UNS: A96101EN: EN AW-6101 | — | ≥ 170 MPaMINIMUM · T6 Temper · Extruded Bar · up to 150mm | 2.7 g/cm³TYPICAL | VERIFIED | |
| 6106 AluminumEN AW-6106 | Wrought Aluminum Alloys | AA: 6106UNS: A96106EN: EN AW-6106 | — | ≥ 200 MPaMINIMUM · T6 Temper · Extruded Profiles · up to 10mm WT | 2.7 g/cm³TYPICAL | VERIFIED | |
| 6262 AluminumEN AW-6262 | Wrought Aluminum Alloys | AA: 6262UNS: A96262EN: EN AW-6262 | — | ≥ 240 MPaMINIMUM · T6 Temper · Extrusions · up to 200mm Dia | 2.71 g/cm³TYPICAL | VERIFIED | |
| 7050 AluminumAA 7050 | Wrought Aluminum Alloys | AA: 7050UNS: A97050ISO: AlZn6CuMgZr | 39.5 % IACSTYPICAL · T76, T76511 Temper | 469 MPaTYPICAL · T7451 Temper · Plate · LONGITUDINAL | 2.83 g/cm³TYPICAL | VERIFIED | |
| 7075 AluminumAA 7075 | Wrought Aluminum Alloys | AA: 7075UNS: A97075ISO: AlZn5.5MgCu | 45 % IACSTYPICAL · O Temper | 103 MPaTYPICAL · O Temper · Cold Finished Rod & Bar | 2.8 g/cm³TYPICAL | VERIFIED | |
| 7175 AluminumAA 7175 | Wrought Aluminum Alloys | AA: 7175UNS: A97175ISO: AlZn5.5MgCu(B) | 33 % IACSTYPICAL · T66 Temper | 510 MPaTYPICAL · T66 Temper · Forgings | 2.8 g/cm³TYPICAL | VERIFIED | |
| 7475 AluminumAA 7475 | Wrought Aluminum Alloys | AA: 7475UNS: A97475ISO: AlZn5.5MgCu(A) | 36 % IACSTYPICAL · T651 Temper | 510 MPaTYPICAL · T651 Temper · Sheet & Plate | 2.8 g/cm³TYPICAL | VERIFIED | |
| ASTM A36 Structural Steel | Carbon Steel | ASTM: A36 | — | ≥ 248.2 MPaMINIMUM · Producer-stated plate requirements; heat treatment not stated · Finished plate; excludes coil pending conversion and qualification · 2.54–152 mm · TRANSVERSE · Original imperial producer requirements retained; do not apply to unqualified coil. Test temperature not stated. | — | VERIFIED | |
| ASTM A48 Class 20 Gray Cast IronClass 20 Gray Iron | Gray Cast Iron | ASTM: A48 Class 20UNS: F11401SAE: J431 G2000 | — | — | 7.1 g/cm³TYPICAL | VERIFIED | |
| ASTM A48 Class 25 Gray Cast IronClass 25 Gray Iron | Gray Cast Iron | ASTM: A48 Class 25UNS: F11701SAE: J431 G2500 | — | — | 7.15 g/cm³TYPICAL | VERIFIED | |
| ASTM A48 Class 30 Gray Cast IronClass 30 Gray Iron | Gray Cast Iron | ASTM: A48 Class 30UNS: F12101SAE: J431 G3000 | — | — | 7.2 g/cm³TYPICAL | VERIFIED | |
| ASTM A48 Class 35 Gray Cast IronClass 35 Gray Iron | Gray Cast Iron | ASTM: A48 Class 35UNS: F12401SAE: J431 G3500 | — | — | 7.2 g/cm³TYPICAL | VERIFIED | |
| ASTM A48 Class 40 Gray Cast IronClass 40 Gray Iron | Gray Cast Iron | ASTM: A48 Class 40UNS: F12801SAE: J431 G4000 | — | — | 7.25 g/cm³TYPICAL | VERIFIED | |
| ASTM A48 Class 50 Gray Cast IronClass 50 Gray Iron | Gray Cast Iron | ASTM: A48 Class 50UNS: F13501SAE: J431 G5000 | — | — | 7.3 g/cm³TYPICAL | VERIFIED | |
| ASTM A536 Grade 100-70-03 Ductile Cast IronDuctile Iron 100-70-03 | Ductile (Nodular) Iron | ASTM: A536 Grade 100-70-03UNS: F34800SAE: J434 D7003 | — | ≥ 483 MPaMINIMUM · Normalized or Q&T · Governing minimum 0.2% offset yield strength per ASTM A536 (70 ksi = 483 MPa). | 7.15 g/cm³TYPICAL | VERIFIED | |
| ASTM A536 Grade 120-90-02 Ductile Cast IronDuctile Iron 120-90-02 | Ductile (Nodular) Iron | ASTM: A536 Grade 120-90-02UNS: F36200SAE: J434 D9002 | — | ≥ 621 MPaMINIMUM · Quenched and Tempered · Governing minimum 0.2% offset yield strength per ASTM A536 (90 ksi = 621 MPa). | 7.15 g/cm³TYPICAL | VERIFIED | |
| ASTM A536 Grade 60-40-18 Ductile Cast IronDuctile Iron 60-40-18 | Ductile (Nodular) Iron | ASTM: A536 Grade 60-40-18UNS: F32800SAE: J434 D4018 | — | ≥ 276 MPaMINIMUM · Annealed or As-Cast · Governing minimum 0.2% offset yield strength per ASTM A536 (40 ksi = 276 MPa). | 7.1 g/cm³TYPICAL | VERIFIED | |
| ASTM A536 Grade 65-45-12 Ductile Cast IronDuctile Iron 65-45-12 | Ductile (Nodular) Iron | ASTM: A536 Grade 65-45-12UNS: F33100SAE: J434 D4512 | — | ≥ 310 MPaMINIMUM · As-Cast · Governing minimum 0.2% offset yield strength per ASTM A536 (45 ksi = 310 MPa). | 7.1 g/cm³TYPICAL | VERIFIED | |
| ASTM A536 Grade 80-55-06 Ductile Cast IronDuctile Iron 80-55-06 | Ductile (Nodular) Iron | ASTM: A536 Grade 80-55-06UNS: F33800SAE: J434 D5506 | — | ≥ 379 MPaMINIMUM · As-Cast or Normalized · Governing minimum 0.2% offset yield strength per ASTM A536 (55 ksi = 379 MPa). | 7.15 g/cm³TYPICAL | VERIFIED | |
| Britannia Silver 958Britannia Silver | Alloyed Silver | UK-HALLMARK: 958ISO: Ag958DIN: Ag958 | 92 % IACSTYPICAL · 20 °C | ≥ 80 MPaTYPICAL · Annealed (Soft) · Strip, Sheet, Wire | 10.4 g/cm³TYPICAL · 20 °C | VERIFIED | |
| Butyl Rubber (IIR)Isobutylene Isoprene Rubber | Weathering & Chemical Resistant Elastomers | ASTM: IIRISO: IIRASTM-D2000: Type BA | — | — | — | VERIFIED | |
| C10100 Oxygen-Free Electronic (OFE) CopperOxygen-Free Electronic | Pure Copper | UNS: C10100COMMERCIAL: Oxygen-Free Electronic CopperCDA: Alloy 101 | 101 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 101.0 % IACS at 68°F (20°C) | 248.2 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in; Yield strength at 0.5% extension under load | 8.941 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.323 lb/cu in. at 68°F (8.941 g/cm³ at 20°C) | VERIFIED | |
| C10200 Oxygen-Free (OF) CopperOxygen-Free | Pure Copper | UNS: C10200COMMERCIAL: Oxygen-Free CopperCDA: Alloy 102 | 101 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 101.0 % IACS at 68°F (20°C) | 248.2 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in; Yield strength at 0.5% extension under load | 8.941 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.323 lb/cu in. at 68°F (8.941 g/cm³ at 20°C) | VERIFIED | |
| C10300 Oxygen-Free Extra Low Phosphorus (OFXLP) CopperOxygen-Free Extra Low Phosphorus | Deoxidized Copper | UNS: C10300COMMERCIAL: Oxygen-Free Extra Low Phosphorus CopperCDA: Alloy 103 | 99 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 99.0 % IACS at 68°F (20°C) | 248.2 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in; Yield strength at 0.5% extension under load | 8.941 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.323 lb/cu in. at 68°F (8.941 g/cm³ at 20°C) | VERIFIED | |
| C11000 ETP CopperElectrolytic Tough Pitch | Pure Copper | UNS: C11000COMMERCIAL: Electrolytic Tough PitchCOMMERCIAL: ETP | 101 % IACSTYPICAL · 20 °C · CDA Physical Properties section: Measured at 68°F (20°C), volume and weight basis | 206.8 MPaTYPICAL · 1/4 Hard (H01) · Flat Products · 0.025 in · 20 °C · Section Size: 0.025 in; Yield strength at 0.5% extension under load | 8.885–8.941 g/cm³TYPICAL · 20 °C · CDA Physical Properties section: Measured at 68°F (20°C). Footnote 1 specifies actual range 0.321 - 0.323 lb/cu in. (8.885 - 8.941 g/cm³) | VERIFIED | |
| C12000 DLP CopperPhosphorus-Deoxidized Low Residual Phosphorus | Deoxidized Copper | UNS: C12000COMMERCIAL: Deoxidized Low Phosphorus CopperCDA: Alloy 120 | 98 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 98.0 % IACS at 68°F (20°C) | 248.2 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in; Yield strength at 0.5% extension under load | 8.941 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.323 lb/cu in. at 68°F (8.941 g/cm³ at 20°C) | VERIFIED | |
| C12200 DHP CopperPhosphorus-Deoxidized High Residual Phosphorus | Deoxidized Copper | UNS: C12200COMMERCIAL: Deoxidized High Phosphorus CopperCDA: Alloy 122 | 85 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 85.0 % IACS at 68°F (20°C) | 206.8 MPaTYPICAL · 1/4 Hard (H01) · Flat Products · 0.25 · 20 °C · Section Size: 0.25; Section Size: 0.25 in; Yield strength at 0.5% extension under load | 8.941 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.323 lb/cu in. at 68°F (8.941 g/cm³ at 20°C) | VERIFIED | |
| C14500 Tellurium CopperTellurium Copper | Free-Machining Copper | UNS: C14500COMMERCIAL: Tellurium CopperCDA: Alloy 145 | 93 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 93.0 % IACS at 68°F (20°C) | 275.8 MPaTYPICAL · 1/2 Hard (H02) · Rod · 1 · 20 °C · Section Size: 1; Cold Work: 20%; Section Size: 1 in; Yield strength at 0.5% extension under load | 8.941 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.323 lb/cu in. at 68°F (8.941 g/cm³ at 20°C) | VERIFIED | |
| C14700 Sulfur CopperSulfur Copper | Free-Machining Copper | UNS: C14700COMMERCIAL: Sulfur CopperCDA: Alloy 147 | 95 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 95.0 % IACS at 68°F (20°C) | 268.9 MPaTYPICAL · 1/2 Hard (H02) · Rod · 2 · 20 °C · Section Size: 2; Section Size: 2 in; Yield strength at 0.5% extension under load | 8.941 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.323 lb/cu in. at 68°F (8.941 g/cm³ at 20°C) | VERIFIED | |
| C17200 Beryllium Copper (Alloy 25)Alloy 25 | Beryllium Copper | UNS: C17200COMMERCIAL: Beryllium Copper Alloy 25CDA: Alloy 172 | 22 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 22.0 % IACS at 68°F (20°C) | 1206.6 MPaTYPICAL · 1/2 Hard and Precipitation Heat Treated (TH02) · Flat Products · 0.188 · 20 °C · Section Size: 0.188; Section Size: 0.188 in; Yield strength at 0.5% extension under load | 8.027 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.29 lb/cu in. at 68°F (8.027 g/cm³ at 20°C) | VERIFIED | |
| C17500 Beryllium Copper (Alloy 10)Alloy 10 | Beryllium Copper | UNS: C17500COMMERCIAL: Beryllium Copper Alloy 10CDA: Alloy 175 | 45 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 45.0 % IACS at 68°F (20°C) | 655 MPaTYPICAL · Hard and Precipitation Heat Treated (TH04) · Flat Products · 20 °C · Yield strength at 0.5% extension under load | 8.608 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.311 lb/cu in. at 68°F (8.608 g/cm³ at 20°C) | VERIFIED | |
| C17510 Beryllium Copper (Alloy 3)Alloy 3 | Beryllium Copper | UNS: C17510COMMERCIAL: Beryllium Copper Alloy 3CDA: Alloy 175.1 | 48 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 48.0 % IACS at 68°F (20°C) | 744.6 MPaTYPICAL · 1/2 Hard and Precipitation Heat Treated (TH02) · Flat Products · 20 °C · Yield strength at 0.5% extension under load | 8.775 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.317 lb/cu in. at 68°F (8.775 g/cm³ at 20°C) | VERIFIED | |
| C19400 High-Strength Modified Copper (HSM Copper)HSM Copper | High-Performance Copper Alloys | UNS: C19400COMMERCIAL: High Strength Modified CopperCDA: Alloy 194 | 65 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 65.0 % IACS at 68°F (20°C) | 365.4 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in; Yield strength at 0.5% extension under load | 8.913 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.322 lb/cu in. at 68°F (8.913 g/cm³ at 20°C) | VERIFIED | |
| C26000 Cartridge Brass 70/30Cartridge Brass 70/30 | Cartridge Brass | UNS: C26000COMMERCIAL: Cartridge BrassCDA: Alloy 260 | 28 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 28.0 % IACS at 68°F (20°C) | 275.8 MPaTYPICAL · 1/4 Hard (H01) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in; Yield strength at 0.5% extension under load | 8.525 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.308 lb/cu in. at 68°F (8.525 g/cm³ at 20°C) | VERIFIED | |
| C26800 Yellow Brass 66%Yellow Brass 66% | Yellow Brass | UNS: C26800COMMERCIAL: Yellow Brass 66%CDA: Alloy 268 | 27 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 27.0 % IACS at 68°F (20°C) | 344.7 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in; Yield strength at 0.5% extension under load | 8.47 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.306 lb/cu in. at 68°F (8.47 g/cm³ at 20°C) | VERIFIED | |
| C27000 Yellow Brass 65%Yellow Brass 65% | Yellow Brass | UNS: C27000COMMERCIAL: Yellow Brass 65%CDA: Alloy 270 | 27 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 27.0 % IACS at 68°F (20°C) | 344.7 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in; Yield strength at 0.5% extension under load | 8.47 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.306 lb/cu in. at 68°F (8.47 g/cm³ at 20°C) | VERIFIED | |
| C27200 Yellow Brass 63%Yellow Brass 63% | Yellow Brass | UNS: C27200COMMERCIAL: Yellow Brass 63%CDA: Alloy 272 | 27.6 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 27.6 % IACS at 68°F (20°C) | 379.2 MPaTYPICAL · Hard Drawn (H80) · Tube · 0.065 · 20 °C · Section Size: 0.065; Section Size: 0.065 in; Yield strength at 0.5% extension under load | 8.442 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.305 lb/cu in. at 68°F (8.442 g/cm³ at 20°C) | VERIFIED | |
| C28000 Muntz Metal 60/40Muntz Metal | Yellow Brass | UNS: C28000COMMERCIAL: Muntz Metal 60/40CDA: Alloy 280 | 28 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 28.0 % IACS at 68°F (20°C) | 344.7 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in; Yield strength at 0.5% extension under load | 8.387 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.303 lb/cu in. at 68°F (8.387 g/cm³ at 20°C) | VERIFIED | |
| C36000 Free-Cutting BrassFree-Cutting Brass | Free-Machining Brass | UNS: C36000COMMERCIAL: Free-Cutting BrassCDA: Alloy 360 | 26 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 26.0 % IACS at 68°F (20°C) | 117.2 MPaTYPICAL · 1/2 Hard (H02) · Bar · 1.5 · 20 °C · Section Size: 1.5; Section Size: 1.5 in; Yield strength at 0.5% extension under load | 8.498 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.307 lb/cu in. at 68°F (8.498 g/cm³ at 20°C) | VERIFIED | |
| C46400 Naval BrassNaval Brass | Naval Brass | UNS: C46400COMMERCIAL: Naval BrassCDA: Alloy 464 | 26 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 26.0 % IACS at 68°F (20°C) | 172.4 MPaTYPICAL · As Hot Rolled (M20) · Flat Products · 1 · 20 °C · Section Size: 1; Section Size: 1 in; Yield strength at 0.5% extension under load | 8.415 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.304 lb/cu in. at 68°F (8.415 g/cm³ at 20°C) | VERIFIED | |
| C51000 Phosphor Bronze 5% APhosphor Bronze 5% Grade A | Phosphor Bronze | UNS: C51000COMMERCIAL: Phosphor Bronze Grade ACDA: Alloy 510 | 15 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 15.0 % IACS at 68°F (20°C) | 372.3 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 20 °C · Yield strength at 0.5% extension under load | 8.858 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.32 lb/cu in. at 68°F (8.858 g/cm³ at 20°C) | VERIFIED | |
| C52100 Phosphor Bronze 8% CPhosphor Bronze 8% Grade C | Phosphor Bronze | UNS: C52100COMMERCIAL: Phosphor Bronze Grade CCDA: Alloy 521 | 13 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 13.0 % IACS at 68°F (20°C) | 441.3 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in; Yield strength at 0.5% extension under load | 8.802 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.318 lb/cu in. at 68°F (8.802 g/cm³ at 20°C) | VERIFIED | |
| C54400 Free-Machining Phosphor Bronze (B-2)Phosphor Bronze B-2 | Phosphor Bronze | UNS: C54400COMMERCIAL: Free-Machining Phosphor BronzeCDA: Alloy 544 | 19 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 19.0 % IACS at 68°F (20°C) | 275.8 MPaTYPICAL · 1/2 Hard (H02) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in; Yield strength at 0.5% extension under load | 8.858 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.32 lb/cu in. at 68°F (8.858 g/cm³ at 20°C) | VERIFIED | |
| C61400 Aluminum Bronze DAluminum Bronze D | Aluminum Bronze | UNS: C61400COMMERCIAL: Aluminum Bronze DCDA: Alloy 614 | 14 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 14.0 % IACS at 68°F (20°C) | 413.7 MPaTYPICAL · Hard (H04) · Flat Products · 0.125 · 20 °C · Section Size: 0.125; Section Size: 0.125 in; Yield strength at 0.5% extension under load | 7.889 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.285 lb/cu in. at 68°F (7.889 g/cm³ at 20°C) | VERIFIED | |
| C63000 Nickel-Aluminum Bronze (AMS 4640)Nickel-Aluminum Bronze | Aluminum Bronze | UNS: C63000COMMERCIAL: Nickel-Aluminum Bronze (AMS 4640)CDA: Alloy 630 | 7 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 7.0 % IACS at 68°F (20°C) | 344.7 MPaTYPICAL · As Hot Extruded (M30) · Bar · 3 · 20 °C · Section Size: 3; Section Size: 3 in; Yield strength at 0.5% extension under load | 7.584 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.274 lb/cu in. at 68°F (7.584 g/cm³ at 20°C) | VERIFIED | |
| C63200 Nickel-Aluminum Bronze (Naval Alloy)Naval Nickel-Aluminum Bronze | Aluminum Bronze | UNS: C63200COMMERCIAL: Nickel-Aluminum Bronze (Naval Alloy)CDA: Alloy 632 | 7 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 7.0 % IACS at 68°F (20°C) | 310.3 MPaTYPICAL · Light Anneal (O50) · Forgings · 5 · 20 °C · Section Size: 5; Section Size: 5 in; Yield strength at 0.5% extension under load | 7.64 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.276 lb/cu in. at 68°F (7.64 g/cm³ at 20°C) | VERIFIED | |
| C65500 High-Silicon Bronze AHigh-Silicon Bronze A | Silicon Bronze | UNS: C65500COMMERCIAL: High-Silicon Bronze ACDA: Alloy 655 | 7 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 7.0 % IACS at 68°F (20°C) | 241.3 MPaTYPICAL · 1/4 Hard (H01) · Flat Products · 0.04 · 20 °C · Section Size: 0.04; Section Size: 0.04 in; Yield strength at 0.5% extension under load | 8.525 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.308 lb/cu in. at 68°F (8.525 g/cm³ at 20°C) | VERIFIED | |
| C70600 Copper-Nickel 90/10Copper-Nickel 90/10 | Copper-Nickel (Cupronickel) | UNS: C70600COMMERCIAL: 90/10 CupronickelCDA: Alloy 706 | 9 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 9.0 % IACS at 68°F (20°C) | 172.4 MPaTYPICAL · Hard (H04) · Bar · 20 °C · Yield strength at 0.5% extension under load | 8.941 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.323 lb/cu in. at 68°F (8.941 g/cm³ at 20°C) | VERIFIED | |
| C71500 Copper-Nickel 70/30Copper-Nickel 70/30 | Copper-Nickel (Cupronickel) | UNS: C71500COMMERCIAL: 70/30 CupronickelCDA: Alloy 715 | 4.6 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 4.6 % IACS at 68°F (20°C) | — | 8.941 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.323 lb/cu in. at 68°F (8.941 g/cm³ at 20°C) | VERIFIED | |
| C93200 Bearing Bronze (SAE 660)SAE 660 | Bearing Bronze | UNS: C93200COMMERCIAL: SAE 660 Bearing BronzeCDA: Alloy 932 | 12 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 12.0 % IACS at 68°F (20°C) | 96.5 MPaTYPICAL · As Centrifugal Cast (M02) · As Centrifugal Cast · 20 °C · Yield strength at 0.5% extension under load | 8.913 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.322 lb/cu in. at 68°F (8.913 g/cm³ at 20°C) | VERIFIED | |
| C95400 Aluminum Bronze 9CAluminum Bronze 9C | Aluminum Bronze | UNS: C95400COMMERCIAL: Aluminum Bronze 9CCDA: Alloy 954 | 13 % IACSTYPICAL · 20 °C · CDA Physical Properties: Volume conductivity 13.0 % IACS at 68°F (20°C) | 206.8 MPaTYPICAL · As Centrifugal Cast (M02) · As Centrifugal Cast · 20 °C · Yield strength at 0.5% extension under load | 7.446 g/cm³TYPICAL · 20 °C · CDA Physical Properties: Density 0.269 lb/cu in. at 68°F (7.446 g/cm³ at 20°C) | VERIFIED | |
| Chloroprene Rubber (CR / Neoprene)Neoprene | Oil & Fuel Resistant Elastomers | ASTM: CRISO: CRASTM-D2000: Type BC / BE | — | — | — | VERIFIED | |
| EN-GJL-150 Gray Cast IronGG-15 | Gray Cast Iron | EN: EN-GJL-150W-Nr: EN-JL1020DIN: GG-15 | — | — | 7.1 g/cm³TYPICAL | VERIFIED | |
| EN-GJL-200 Gray Cast IronGG-20 | Gray Cast Iron | EN: EN-GJL-200W-Nr: EN-JL1030DIN: GG-20 | — | — | 7.15 g/cm³TYPICAL | VERIFIED | |
| EN-GJL-250 Gray Cast IronGG-25 | Gray Cast Iron | EN: EN-GJL-250W-Nr: EN-JL1040DIN: GG-25 | — | — | 7.2 g/cm³TYPICAL | VERIFIED | |
| EN-GJL-300 Gray Cast IronGG-30 | Gray Cast Iron | EN: EN-GJL-300W-Nr: EN-JL1050DIN: GG-30 | — | — | 7.25 g/cm³TYPICAL | VERIFIED | |
| EN-GJS-400-15 Ductile Cast IronEN-JS1030 | Ductile (Nodular) Iron | EN: EN-GJS-400-15W-Nr: EN-JS1030ISO: 1083/JS/400-15 | — | ≥ 250 MPaMINIMUM · Ferritic | 7.1 g/cm³TYPICAL | VERIFIED | |
| EN-GJS-400-18 Ductile Cast IronGGG-40 | Ductile (Nodular) Iron | EN: EN-GJS-400-18W-Nr: EN-JS1020DIN: GGG-40 | — | ≥ 250 MPaMINIMUM · Ferritic · Governing minimum 0.2% proof stress (Rp0.2) per EN 1563. | 7.1 g/cm³TYPICAL | VERIFIED | |
| EN-GJS-500-7 Ductile Cast IronGGG-50 | Ductile (Nodular) Iron | EN: EN-GJS-500-7W-Nr: EN-JS1050DIN: GGG-50 | — | ≥ 320 MPaMINIMUM · Ferritic-Pearlitic · Governing minimum 0.2% proof stress (Rp0.2) per EN 1563. | 7.15 g/cm³TYPICAL | VERIFIED | |
| EN-GJS-600-3 Ductile Cast IronGGG-60 | Ductile (Nodular) Iron | EN: EN-GJS-600-3W-Nr: EN-JS1060DIN: GGG-60 | — | ≥ 370 MPaMINIMUM · Pearlitic-Ferritic · Governing minimum 0.2% proof stress (Rp0.2) per EN 1563. | 7.15 g/cm³TYPICAL | VERIFIED | |
| EN-GJS-700-2 Ductile Cast IronGGG-70 | Ductile (Nodular) Iron | EN: EN-GJS-700-2W-Nr: EN-JS1070DIN: GGG-70 | — | ≥ 420 MPaMINIMUM · Pearlitic · Governing minimum 0.2% proof stress (Rp0.2) per EN 1563. | 7.15 g/cm³TYPICAL | VERIFIED | |
| Ethylene Propylene Diene Rubber (EPDM)EPDM | Weathering & Chemical Resistant Elastomers | ASTM: EPDMISO: EPDMASTM-D2000: Type BA / CA | — | — | — | VERIFIED | |
| Fine Silver 999999 Silver | Fine Silver | UNS: P07010ISO: Ag99.9ASTM: Grade 99.90 | 106 % IACSTYPICAL · 20 °C | ≥ 40 MPaTYPICAL · Annealed (Soft) · Strip, Sheet, Wire, Bar | 10.49 g/cm³TYPICAL · 20 °C | VERIFIED | |
| Fluoroelastomer (FKM)Viton® (Registered Trademark of Chemours) | High-Temperature & Specialty Elastomers | ASTM: FKMISO: FPMASTM-D2000: Type HK | — | — | — | VERIFIED | |
| Hydrogenated Nitrile Rubber (HNBR)Highly Saturated Nitrile | Oil & Fuel Resistant Elastomers | ASTM: HNBRISO: HNBRASTM-D2000: Type DH | — | — | 1 g/cm³TYPICAL · Standard Peroxide-Cured 70 Shore A Compound (Fully Hydrogenated) · Unpigmented raw hydrogenated polymer base density. | VERIFIED | |
| Natural Rubber (NR)Polyisoprene Rubber | General-Purpose Diene Rubbers | ASTM: NRISO: NRASTM-D2000: Type AA | — | — | — | VERIFIED | |
| Nitrile Butadiene Rubber (NBR)Buna-N | Oil & Fuel Resistant Elastomers | ASTM: NBRISO: NBRASTM-D2000: Type BF / BG / CH | — | — | — | VERIFIED | |
| Polyester Polyurethane (AU)Polyester Urethane | Polyurethane Elastomers | ASTM: AUISO: AUASTM-D2000: Type BG (AU) | — | — | — | VERIFIED | |
| Polyether Polyurethane (EU)Polyether Urethane | Polyurethane Elastomers | ASTM: EUISO: EUASTM-D2000: Type BG (EU) | — | — | — | VERIFIED | |
| SAE 1006 Carbon Steel | Carbon Steel | SAE: 1006AISI: 1006UNS: G10060 | — | ≥ 280 MPaMINIMUM · Cold Drawn Bar (19 to 32 mm) · Bar | 7.87 g/cm³TYPICAL | VERIFIED | |
| SAE 1008 Carbon Steel | Carbon Steel | SAE: 1008AISI: 1008SPECIFICATION: SAE 1008 Carbon Steel Engineering Datasheet | — | ≥ 168.9 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | 7.87 g/cm³TYPICAL | VERIFIED | |
| SAE 1010 Carbon Steel | Carbon Steel | SAE: 1010AISI: 1010SPECIFICATION: SAE 1010 Carbon Steel Engineering Datasheet | — | ≥ 179.3 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | 7.87 g/cm³TYPICAL | VERIFIED | |
| SAE 1012 Carbon Steel | Carbon Steel | SAE: 1012AISI: 1012UNS: G10120 | — | ≥ 315 MPaMINIMUM · Cold Drawn Bar (19 to 32 mm) · Bar | 7.87 g/cm³TYPICAL | VERIFIED | |
| SAE 1015 Carbon Steel | Carbon Steel | SAE: 1015AISI: 1015UNS: G10150 | — | ≥ 325 MPaMINIMUM · Cold Drawn Bar (19 to 32 mm) · Bar | 7.87 g/cm³TYPICAL | VERIFIED | |
| SAE 1016 Carbon Steel | Carbon Steel | SAE: 1016AISI: 1016UNS: G10160 | — | ≥ 350 MPaMINIMUM · Cold Drawn Bar (19 to 32 mm) · Bar | 7.87 g/cm³TYPICAL | VERIFIED | |
| SAE 1017 Carbon Steel | Carbon Steel | SAE: 1017AISI: 1017UNS: G10170 | — | ≥ 365 MPaMINIMUM · Cold Drawn Bar (19 to 32 mm) · Bar | 7.87 g/cm³TYPICAL | VERIFIED | |
| SAE 1018 Carbon Steel | Carbon Steel | SAE: 1018AISI: 1018SPECIFICATION: SAE 1018 Carbon Steel Engineering Datasheet | — | ≥ 220.6 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | 7.87 g/cm³TYPICAL | VERIFIED | |
| SAE 1020 Carbon Steel | Carbon Steel | SAE: 1020AISI: 1020SPECIFICATION: SAE 1020 Carbon Steel Engineering Datasheet | — | ≥ 206.8 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | 7.87 g/cm³TYPICAL | VERIFIED | |
| SAE 1021 Carbon Steel | Carbon Steel | SAE: 1021AISI: 1021UNS: G10210 | — | ≥ 400 MPaMINIMUM · Cold Drawn Bar (19 to 32 mm) · Bar | 7.87 g/cm³TYPICAL | VERIFIED | |
| SAE 1022 Carbon Steel | Carbon Steel | SAE: 1022AISI: 1022UNS: G10220 | — | ≥ 405 MPaMINIMUM · Cold Drawn Bar (19 to 32 mm) · Bar | 7.87 g/cm³TYPICAL | VERIFIED | |
| SAE 1025 Carbon Steel | Carbon Steel | SAE: 1025AISI: 1025SPECIFICATION: SAE 1025 Carbon Steel Engineering Datasheet | — | ≥ 220.6 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | 7.86 g/cm³TYPICAL | VERIFIED | |
| SAE 1026 Carbon Steel | Carbon Steel | SAE: 1026AISI: 1026UNS: G10260 | — | ≥ 435 MPaMINIMUM · Cold Drawn Bar (19 to 32 mm) · Bar | 7.87 g/cm³TYPICAL | VERIFIED | |
| SAE 1030 Carbon Steel | Carbon Steel | SAE: 1030AISI: 1030SPECIFICATION: SAE 1030 Carbon Steel Engineering Datasheet | — | ≥ 258.6 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 1035 Carbon Steel | Carbon Steel | SAE: 1035AISI: 1035SPECIFICATION: SAE 1035 Carbon Steel Engineering Datasheet | — | ≥ 272.3 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 1038 Carbon Steel | Carbon Steel | SAE: 1038AISI: 1038UNS: G10380 | — | ≥ 495 MPaMINIMUM · Cold Drawn Bar (19 to 32 mm) · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 1040 Carbon Steel | Carbon Steel | SAE: 1040AISI: 1040SPECIFICATION: SAE 1040 Carbon Steel Engineering Datasheet | — | ≥ 289.6 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 1042 Carbon Steel | Carbon Steel | SAE: 1042AISI: 1042UNS: G10420 | — | ≥ 510 MPaMINIMUM · Cold Drawn Bar (19 to 32 mm) · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 1044 Carbon Steel | Carbon Steel | SAE: 1044AISI: 1044UNS: G10440 | — | ≥ 515 MPaMINIMUM · Cold Drawn Bar (19 to 32 mm) · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 1045 Carbon Steel | Carbon Steel | SAE: 1045AISI: 1045SPECIFICATION: SAE 1045 Carbon Steel Engineering Datasheet | — | ≥ 310.3 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 1050 Carbon Steel | Carbon Steel | SAE: 1050AISI: 1050SPECIFICATION: SAE 1050 Carbon Steel Engineering Datasheet | — | ≥ 341.3 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 1055 Carbon Steel | Carbon Steel | SAE: 1055AISI: 1055UNS: G10550 | — | ≥ 570 MPaMINIMUM · Cold Drawn Bar (19 to 32 mm) · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 1060 Carbon Steel | Carbon Steel | SAE: 1060AISI: 1060SPECIFICATION: SAE 1060 Carbon Steel Engineering Datasheet | — | ≥ 372.3 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 1065 Carbon Steel | Carbon Steel | SAE: 1065AISI: 1065UNS: G10650 | — | ≥ 600 MPaMINIMUM · Cold Drawn Bar (19 to 32 mm) · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 1070 Carbon Steel | Carbon Steel | SAE: 1070AISI: 1070SPECIFICATION: SAE 1070 Carbon Steel Engineering Datasheet | — | ≥ 386.1 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 1075 Carbon Steel | Carbon Steel | SAE: 1075AISI: 1075UNS: G10750 | — | ≥ 635 MPaMINIMUM · Cold Drawn Bar (19 to 32 mm) · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 1080 Carbon Steel | Carbon Steel | SAE: 1080AISI: 1080SPECIFICATION: SAE 1080 Carbon Steel Engineering Datasheet | — | ≥ 424 MPaMINIMUM · Hot rolled (estimated minimum) · Bar · Producer estimated minimum, not a certified or guaranteed specification limit. Section size and test temperature are not stated. | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 1084 Carbon Steel | Carbon Steel | SAE: 1084AISI: 1084UNS: G10840 | — | ≥ 660 MPaMINIMUM · Cold Drawn Bar (19 to 32 mm) · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 1090 Carbon Steel | Carbon Steel | SAE: 1090AISI: 1090UNS: G10900 | — | ≥ 675 MPaMINIMUM · Cold Drawn Bar (19 to 32 mm) · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 1095 Carbon Steel | Carbon Steel | SAE: 1095SPECIFICATION: SAE 1095 Carbon Steel Engineering Datasheet | — | ≥ 380 MPaMINIMUM · Spheroidize Annealed Bar · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 1117 Carbon Steel | Carbon Steel | SAE: 1117AISI: 1117UNS: G11170 | — | ≥ 395 MPaMINIMUM · Cold Drawn Bar (19 to 32 mm) · Bar | 7.87 g/cm³TYPICAL | VERIFIED | |
| SAE 1141 Carbon Steel | Carbon Steel | SAE: 1141AISI: 1141UNS: G11410 | — | ≥ 560 MPaMINIMUM · Cold Drawn Bar (19 to 32 mm) · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 1144 Carbon Steel | Carbon Steel | SAE: 1144AISI: 1144UNS: G11440 | — | ≥ 570 MPaMINIMUM · Cold Drawn Bar (19 to 32 mm) · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 1215 Carbon Steel | Carbon Steel | SAE: 1215AISI: 1215UNS: G12150 | — | ≥ 415 MPaMINIMUM · Cold Drawn Bar (19 to 32 mm) · Bar | 7.87 g/cm³TYPICAL | VERIFIED | |
| SAE 12L14 Free-Machining Steel | Carbon Steel | SAE: 12L14AISI: 12L14UNS: G12144 | — | ≥ 415 MPaMINIMUM · Cold Drawn Bar (19 to 32 mm) · Bar | 7.87 g/cm³TYPICAL | VERIFIED | |
| SAE 4118 Alloy Steel | Alloy Steel | SAE: 4118AISI: 4118UNS: G41180 | — | ≥ 380 MPaMINIMUM · Normalized Bar (25 mm) · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 4130 Alloy Steel | Alloy Steel | SAE: 4130SPECIFICATION: SAE 4130 Alloy Steel Engineering Datasheet | — | ≥ 435 MPaMINIMUM · Normalized Bar · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 4137 Alloy Steel | Alloy Steel | SAE: 4137AISI: 4137UNS: G41370 | — | ≥ 440 MPaMINIMUM · Normalized Bar (25 mm) · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 4140 Alloy Steel | Alloy Steel | SAE: 4140AISI: 4140SPECIFICATION: SAE 4140 Alloy Steel Engineering Datasheet | — | ≥ 740 MPaMINIMUM · Quenched and tempered (voestalpine supply) · Bar · 10–100 mm · voestalpine supply properties for the stated section range; source does not specify test temperature. Not extrapolated to other products or heat treatments. | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 4142 Alloy Steel | Alloy Steel | SAE: 4142SPECIFICATION: SAE 4142 Alloy Steel Engineering Datasheet | — | ≥ 640 MPaMINIMUM · Normalized Bar · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 4145 Alloy Steel | Alloy Steel | SAE: 4145AISI: 4145UNS: G41450 | — | ≥ 470 MPaMINIMUM · Normalized Bar (25 mm) · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 4150 Alloy Steel | Alloy Steel | SAE: 4150SPECIFICATION: SAE 4150 Alloy Steel Engineering Datasheet | — | ≥ 430 MPaMINIMUM · Annealed Bar · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 4320 Alloy Steel | Alloy Steel | SAE: 4320AISI: 4320UNS: G43200 | — | ≥ 420 MPaMINIMUM · Normalized Bar (25 mm) · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 4340 Alloy Steel | Alloy Steel | SAE: 4340SPECIFICATION: SAE 4340 Alloy Steel Engineering Datasheet | — | ≥ 470 MPaMINIMUM · Annealed Bar · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 4620 Alloy Steel | Alloy Steel | SAE: 4620SPECIFICATION: SAE 4620 Alloy Steel Engineering Datasheet | — | ≥ 360 MPaMINIMUM · Normalized Bar - Core Properties · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 5120 Alloy Steel | Alloy Steel | SAE: 5120SPECIFICATION: SAE 5120 Alloy Steel Engineering Datasheet | — | ≥ 340 MPaMINIMUM · Normalized Bar - Core Properties · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 5140 Alloy Steel | Alloy Steel | SAE: 5140SPECIFICATION: SAE 5140 Alloy Steel Engineering Datasheet | — | ≥ 410 MPaMINIMUM · Annealed Bar · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 5160 Alloy Steel | Alloy Steel | SAE: 5160SPECIFICATION: SAE 5160 Alloy Steel Engineering Datasheet | — | ≥ 400 MPaMINIMUM · Annealed Bar · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 52100 Alloy Steel | Alloy Steel | SAE: 52100SPECIFICATION: SAE 52100 Alloy Steel Engineering Datasheet | — | ≥ 380 MPaMINIMUM · Spheroidize Annealed Bar · Bar | 7.81 g/cm³TYPICAL | VERIFIED | |
| SAE 6150 Alloy Steel | Alloy Steel | SAE: 6150SPECIFICATION: SAE 6150 Alloy Steel Engineering Datasheet | — | ≥ 410 MPaMINIMUM · Annealed Bar · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 8617 Alloy Steel | Alloy Steel | SAE: 8617AISI: 8617UNS: G86170 | — | ≥ 360 MPaMINIMUM · Normalized Bar (25 mm) · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 8620 Alloy Steel | Alloy Steel | SAE: 8620SPECIFICATION: SAE 8620 Alloy Steel Engineering Datasheet | — | ≥ 380 MPaMINIMUM · Normalized Bar (870°C) - Core Properties · Bar · Core mechanical properties. | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 8622 Alloy Steel | Alloy Steel | SAE: 8622AISI: 8622UNS: G86220 | — | ≥ 390 MPaMINIMUM · Normalized Bar (25 mm) · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 8630 Alloy Steel | Alloy Steel | SAE: 8630SPECIFICATION: SAE 8630 Alloy Steel Engineering Datasheet | — | ≥ 450 MPaMINIMUM · Normalized Bar · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 8640 Alloy Steel | Alloy Steel | SAE: 8640SPECIFICATION: SAE 8640 Alloy Steel Engineering Datasheet | — | ≥ 415 MPaMINIMUM · Annealed Bar · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 8740 Alloy Steel | Alloy Steel | SAE: 8740SPECIFICATION: SAE 8740 Alloy Steel Engineering Datasheet | — | ≥ 415 MPaMINIMUM · Annealed Bar · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| SAE 9310 Alloy Steel | Alloy Steel | SAE: 9310SPECIFICATION: SAE 9310 Alloy Steel Engineering Datasheet | — | ≥ 585 MPaMINIMUM · Normalized Bar - Core Properties · Bar | 7.85 g/cm³TYPICAL | VERIFIED | |
| Silicone Rubber (VMQ)Silicone | High-Temperature & Specialty Elastomers | ASTM: VMQISO: VMQASTM-D2000: Type FC / FE / GE | — | — | — | VERIFIED | |
| Silver 800800 Silver | Alloyed Silver | DIN: 2.3800ISO: Ag800EN: AgCu20 | 68 % IACSTYPICAL · 20 °C | ≥ 200 MPaTYPICAL · Annealed (Soft) · Strip & Wire | 10.15 g/cm³TYPICAL · 20 °C | VERIFIED | |
| Silver 835835 Silver | Alloyed Silver | DIN: 2.3835ISO: Ag835EN: AgCu16.5 | 72 % IACSTYPICAL · 20 °C | ≥ 180 MPaTYPICAL · Annealed (Soft) · Strip & Wire | 10.22 g/cm³TYPICAL · 20 °C | VERIFIED | |
| Silver 900900 Silver | Alloyed Silver | UNS: P07900ISO: Ag900US-COIN: Coin Silver 900 | 78 % IACSTYPICAL · 20 °C | ≥ 150 MPaTYPICAL · Annealed (Soft) · Strip & Wire | 10.31 g/cm³TYPICAL · 20 °C | VERIFIED | |
| Silver 950950 Silver | Alloyed Silver | ISO: Ag950DIN: Ag950FR-MINERVE: 1st Standard (950) | 90 % IACSTYPICAL · 20 °C | ≥ 95 MPaTYPICAL · Annealed (Soft) · Strip & Wire | 10.38 g/cm³TYPICAL · 20 °C | VERIFIED | |
| Silver 970970 Silver | Alloyed Silver | ISO: Ag970DIN: Ag970EN: AgCu3 | 96 % IACSTYPICAL · 20 °C | ≥ 65 MPaTYPICAL · Annealed (Soft) · Strip & Wire | 10.43 g/cm³TYPICAL · 20 °C | VERIFIED | |
| Sterling Silver 925Sterling Silver | Sterling Silver | UNS: P07925ISO: Ag925ASTM: B742 Grade 92.5 | 84 % IACSTYPICAL · 20 °C | ≥ 125 MPaTYPICAL · Annealed (O Temper) · Strip, Sheet, Wire | 10.36 g/cm³TYPICAL · 20 °C | VERIFIED | |
| Styrene-Butadiene Rubber (SBR)Buna-S | General-Purpose Diene Rubbers | ASTM: SBRISO: SBRASTM-D2000: Type AA / BA | — | — | — | VERIFIED | |
| Type 416 Stainless Steel | Martensitic | UNS: S41600 | — | — | 7.64 g/cm³TYPICAL · Producer physical property; test temperature and product condition not stated. | VERIFIED |