Material Comparison
Compare verified engineering materials side by side with condition-specific mechanical properties.
| Parameter | Fine Silver 999 | C11000 ETP Copper |
|---|---|---|
| Material Family | Silver & Silver Alloys | Copper Alloys |
| Subfamily | Fine Silver | Pure Copper |
| UNS Designation | P07010 | C11000 |
| ISO Designation | Ag99.9 | — |
| ASTM Designation | Grade 99.90 | — |
| DIN Designation | Ag99.9 | — |
| W-Nr Designation | 2.1211 | — |
| UK-HALLMARK Designation | 999 | — |
| SPECIFICATION Designation | ASTM B742 Standard Specification for Fine Silver Contact Material | ASTM B187/B187M |
| COMMERCIAL Designation | — | Electrolytic Tough Pitch |
| Element | Fine Silver 999 | C11000 ETP Copper |
|---|---|---|
| Ag (Silver) | ≥ 99.9% | — |
| Cu (Copper) | ≤ 0.08% | ≥ 99.9% |
| Fe (Iron) | ≤ 0.01% | — |
| Pb (Lead) | ≤ 0.015% | — |
| Bi (Bismuth) | ≤ 0.005% | — |
| Property | Fine Silver 999 | C11000 ETP Copper |
|---|---|---|
| Density · TYPICAL · 20 °CUnit: g/cm³ | 10.49 g/cm³ | 8.885–8.941 g/cm³ |
| Specific Gravity · TYPICALUnit: — | — — | 8.91 — |
| Mechanical Parameter | Fine Silver 999Annealed (Soft) | C11000 ETP Copper1/2 Hard (H02) |
|---|---|---|
| Modulus of Elasticity · TYPICALUnit: | 76 GPa | 117210.9 MPa |
| Poisson's Ratio · TYPICALUnit: dimensionless | 0.37 dimensionless | — dimensionless |
| Yield Strength (0.2% Offset) · Strip, Sheet, Wire, Bar · Annealed (Soft) · TYPICALUnit: MPa | ≥ 40 MPa | — MPa |
| Ultimate Tensile Strength · Strip, Sheet, Wire, Bar · Annealed (Soft) · TYPICALUnit: MPa | ≥ 125 MPa | — MPa |
| Tensile Strength · Flat Products · 0.04 in · 1/2 Hard (H02) · TYPICAL · 20 °CUnit: MPa | — MPa | 289.6 MPa |
| Elongation at Break · Strip, Sheet, Wire, Bar · in 50 mm (2 in) · Annealed (Soft) · TYPICALUnit: % | ≥ 40 % | — % |
| Elongation · Flat Products · 0.04 in · 1/2 Hard (H02) · TYPICAL · 20 °CUnit: % | — % | 14 % |
| Modulus of Rigidity · TYPICALUnit: MPa | — MPa | 44126.4 MPa |
| Machinability Rating · TYPICALUnit: % | — % | 20 % |
| Forgeability Rating · TYPICALUnit: — | — — | 65 — |
| Shear Strength · Flat Products · 0.04 in · 1/2 Hard (H02) · TYPICAL · 20 °CUnit: MPa | — MPa | 179.3 MPa |
| Fatigue Strength · Flat Products · 0.04 in · 1/2 Hard (H02) · TYPICAL · 20 °CUnit: MPa | — MPa | 89.6 MPa |
| Property | Fine Silver 999 | C11000 ETP Copper |
|---|---|---|
| Electrical Conductivity · TYPICAL · 20 °CCategory: ELECTRICAL • Unit: % IACS | 106 % IACS | 101 % IACS |
| Electrical Resistivity · TYPICAL · 20 °CCategory: ELECTRICAL • Unit: nΩ·m | 15.9 nΩ·m | — nΩ·m |
| Thermal Conductivity · TYPICAL · 20 °CCategory: THERMAL • Unit: W/(m·K) | 429 W/(m·K) | 391.15 W/(m·K) |
| Melting Point · TYPICALCategory: THERMAL • Unit: °C | 962 °C | — °C |
| Specific Heat Capacity · TYPICAL · 20 °CCategory: THERMAL • Unit: J/(kg·K) | 235 J/(kg·K) | 385.2 J/(kg·K) |
| Liquidus Temperature · TYPICALCategory: THERMAL • Unit: °C | — °C | 1082.8 °C |
| Solidus Temperature · TYPICALCategory: THERMAL • Unit: °C | — °C | 1065 °C |
| Coefficient of Thermal Expansion (68-212°F) · TYPICALCategory: THERMAL • Unit: µm/(m·K) | — µm/(m·K) | 16.92 µm/(m·K) |
| Coefficient of Thermal Expansion (68-392°F) · TYPICALCategory: THERMAL • Unit: µm/(m·K) | — µm/(m·K) | 17.28 µm/(m·K) |
| Coefficient of Thermal Expansion (68-572°F) · TYPICALCategory: THERMAL • Unit: µm/(m·K) | — µm/(m·K) | 17.64 µm/(m·K) |
| Annealing Temperature Range · RANGECategory: THERMAL • Unit: °C | — °C | 371.1–648.9 °C |
| Hot Working Temperature Range · RANGECategory: THERMAL • Unit: °C | — °C | 760–871.1 °C |
| Hardness Scale | Fine Silver 999 | C11000 ETP Copper |
|---|---|---|
| HV Hardness · Annealed (Soft) · TYPICAL | 25–35 HV | — |
| Rockwell B Hardness · Flat Products · 0.04 in · 1/2 Hard (H02) · TYPICAL · 20 °C | — | 40 HRB |
| Rockwell F Hardness · Flat Products · 0.04 in · 1/2 Hard (H02) · TYPICAL · 20 °C | — | 84 HRF |
| Rockwell 30T Hardness · Flat Products · 0.04 in · 1/2 Hard (H02) · TYPICAL · 20 °C | — | 50 HR30T |
Machinability: Rated at approximately 30% relative to free-cutting brass (C36000). Highly ductile and gummy; produces long continuous chips. Requires sharp high-rake carbide or diamond tooling, light feed rates, and continuous flood coolant to prevent tearing and galling.
Weldability: Weldable with gas tungsten arc (GTAW/TIG) and resistance welding; requires significant preheat and higher heat input due to extremely high thermal diffusivity (1.74 cm²/s). Readily brazed with silver-bearing fluxed fillers.
Formability / Cold Working: Exceptional cold workability. Capable of severe deep drawing, spinning, wire drawing down to micro-diameters, and cold swaging without intermediate annealing.
Heat Treatment & Annealing: Full recrystallization annealing occurs between 200°C and 300°C (392°F to 572°F) for 30 minutes, followed by rapid water quench or air cooling to preserve soft annealed ductility.
Machinability: Machinability rating: 20% relative to free-cutting brass (C36000 = 100%). Forgeability rating: 65.
Weldability: Soldering: Excellent; Brazing: Good; Butt Welding: Good; Gas Shielded Arc Welding: Fair; Oxyacetylene Welding, Coated Metal Arc Welding, Spot Welding, and Seam Welding: Not Recommended.
Formability / Cold Working: Capacity for being cold worked: Excellent; Capacity for being hot formed: Excellent.
Heat Treatment & Annealing: Annealing temperature range: 371.1°C to 648.9°C (700°F - 1200°F). Hot working temperature range: 760.0°C to 871.1°C (1400°F - 1600°F).